Cone crusher

Home page TOP

Cone crusher frequently is used in mining ore beneficiation, medium crushing and tertairy crushing. The transferring cone

liner, set cone liner and
ore minerials type a three-dimensional abrasivation, to be certain which the liner surface area

is inside a condition of advanced pressure and pressure. The broken
stone provides liner floor a great compressive

pressure. In the equivalent time,
large rate shifting cone liner generates large shear stress. Both of these types of

stresses do chisel reduce, slicing, and influence extrusion pit on
liner board, that is the basic principle pressure

technique. For that reason, as for liner product, we calls for not only substantial surface area hardness to chisel

but will also larger electricalsand making machine power and toughness. Given that the special doing work web-site ailment, mainly the ore

hardness value is assorted, three varieties
of stresses strategies can also be unique from one a further. At current, we

ordinarily decide for high-manganese metal as cone crusher liner board.
Thinking of that a English, Hatfield has

investigated austenitic high-manganese metal competently in 1883, the fabric had been presented
"wear resist

steel", now is widely utilized in put on resistant parts in all walks.
This metal possesses Austenitic microstructure

at room temperature, also known as austenitic higher manganese steel. The vast majority of high-
manganese steel made use

of for castings. Its microstructure of high-manganese steel guaranteed wear resistance. The chemical composition of the
substantial manganese metal N1, C = 1 2% 4%, Mn = Il% to 14%, P ≤ 0.06%, Si = 0.5% 1 0%, S ≤ O. 03%. Substantial

manganese steel castings should
be preheated before putting in use. The heated treatment hardness is HB = 179-229. After

quenching, the hardness of high-manganese metal is not
substantial, but the strong effects power or worry will produce

hardening phonomenon, the hardness value may be increased to HB = 450 – 550.
Hardening is formed just at floor 3-6 mm in

depth. This is definitely the purpose to superior manganese steel’s substantial resistant. High-
manganese metal was first

utilized within the production of anti-wear pieces for more than 100 years, which has good electrical power, toughness,

when in use, resistance to abrasive wear, so until now it is still in application.
Rotary drum dryer could be

the heat and dry device of materials. Rotary dryer is employed for drying materials with humidity or granularity

while in the industries of mineral dressing, constructing materials, metallurgy and chemical. It may be made use of for

drying lots of types
of materials this kind of as limstone slag, coal powder, clay stone etc. It has benefit of
realistic construction, efficiency, low energy consumption.
Rotary dryer mostly includes rotary entire body, raw materials feeding

blade, driving and supporting gadget, sealing ring and and
so on.Rotary drum dryer has powerful anti-overload ability,

substantial managing capability, less fuel consumption, reduced dry expense.
Main characteristic of Rotary drum dryer :

dry mining tools has solid anti-overload skill, significant managing capacity, significantly less fuel consumption,

minimal dry cost.
2. flour dryer adopt latest approach to dry.The moist flue fuel and product is same side to the drying

machine, functioning with large temperature
fume to attain incredibly large ability of evaporation.
the exit of rotary

dehydrator displays very low temperature and increased thermal efficiency.
3.According to various material properties to

alter operation parameters, making the material during the flour dryer to kind a secure cylinder
entire body .The heat

exchange is more adequate .
4.The brand new feeding and discharging device remove the drum drying machine feeding jams,

discontinuity, uneven return the phenomenon . and
decrease the dust elimination method load.
5.The new inner framework

strengthened the clean of
scattered elements and heat transfer affect, eliminates the cylinder entire body of the wall

with glue phenomenon,it adapt drastically to
materials moisture.
6.rotary drying machine achive ‘Zero level

thrust’,significantly decreases the wheel wear along with the cylinder body smooth operation and
7.In accordance

to user’s requirment to control product dimension and moisture, coal slime water items may be decrease than 8% when

drying , the
particle dimension is often controlled in 8 mm below.