How to make better use of sand making machine?

Home page TOP

The correct use of sand making equipment can not only improve the service life of the equipment, but also reduce the production of small problems, improve production efficiency, to create the greatest economic benefits for users. Below we explain to you how to properly use the sand making machine.

1, check adjustable vortex chamber observation door is closed, to prevent the material from the vortex chamber observation door out, danger.

2, check the impeller rotation direction, from the direction of the feed port. The impeller should be rotated in a counterclockwise direction, otherwise it should be adjusted to the motor wiring.

3, the starting sequence of the crusher and the conveying equipment is: discharging, the crushing machine, the feeding machine must be unloaded, and the machine can be fed to the normal operation of the crusher. The order of stopping is the opposite of the starting order.
Excessive wear of the 4, granular material strictly according to the requirements, prohibited than the material provisions into the crusher, otherwise, it will cause the impeller’s imbalance and the impeller, to base caused by blocked impeller passage and center into feed tube, the crushing machine is not working properly and found that bulk material and it should be excluded.

5, discharging equipment to stop, should promptly stop feeding, otherwise, will cause the death of impeller, burned motor.

6, to the material to continuous uniform

7, the crushing machine operation process, not a violent vibration and abnormal noise, otherwise, should stop check.

8, machine lubrication
Lubrication for the dry oil lubrication, sand making machine at each work, add a proper amount of grease, after a number of work, to open the main bearings to wash the main bearing, if necessary, replace the bearing.