Home page TOP

SCM ultrafine mill is based on years of accumulated mill production experience, absorb the Swedish advanced mechanical manufacturing technology, a new type of powder processing equipment and testing and improvement after years of development. SCM ultrafine mill is widely used in paints, paper making, pigments, rubber, plastics, fillers, cosmetics, chemicals and other industries.

SCM ultrafine mill is a processing equipment of ultrafine powder and fine powder, mainly applicable to the processing of Mohs hardness of less than 9 of non flammable and explosive brittle materials, such as coal, mica, talc, graphite, quartz, fluorite, dolomite, kaolin and other more than 200 kinds of materials. The hardness of the material directly affects the service life of the wear-resistant parts. When the Mohs hardness is higher than 6, it will reduce the life of the wear-resistant parts.

SCM Ultrafine Mill Product Characteristics
1, high yield and low energy consumption. When the fineness of the product and the power of the motor are the same, the output of the SCM superfine powder mill is 40% higher than that of the air mill and the stirring mill, while the energy consumption of the superfine powder mill is only 1/3 of that of the air mill;

2 、 high fineness of the product. The fineness of the product can be adjusted arbitrarily between 325 mesh -2500 items according to the needs of use. The fineness of the product can reach D97<=5um at one time;

3 、 high safety and reliability. Because there are no rolling bearings and no screws in the mill cavity, there is no problem of the fragility of the bearing and its sealing parts and the damage of the screw to the machine;

4, clean and environmental protection. The use of pulse dust collector and silencer reduces dust and noise pollution and reaches the national environmental protection standard.

Join the Conversation


  1. I enjoy what you guys tend to be up too. Such clever
    work and coverage! Keep up the very good works guys I’ve incorporated
    you guys to my own blogroll.

  2. It’s appropriate time to make a few plans for the future and
    it is time to be happy. I have read this put up and if I may
    I wish to counsel you some fascinating things or suggestions.

    Maybe you could write subsequent articles referring to this article.
    I desire to read even more issues about it!

Leave a comment

Your email address will not be published. Required fields are marked *