Sand making machine is now irreplaceable in the field of crushing and shaping of machine-made sand. Compared with the same kind of sand making equipment, the sand making machine not only has high sand production efficiency, but also the grain type is very good. The standard of the finished sand is fully met the standard of the national advanced sand aggregate material, and it has become a new generation of sand made in the sand and stone industry.
With the development of sand making machine, the wider application field is not only limited to the traditional sand making field, but also can be used in all kinds of crushing and shaping operations in various fields such as ore, cement, metallurgy, slag, refractory, building, stone and so on. It is especially suitable for high hardness, hard and abrasion resistant materials which can not be dealt with.
In the crushing and reshaping field, the sand making machine “dominates” the strong performance of the machine. What are its specific features? Let’s get to know it together.
1, high production efficiency of sand making: deep cavity type rotor and impeller design reduce the resistance of material through, improve the material passing and crushing ratio, using “stone stone”, “stone hit iron” two kinds of broken mode, more crushing capacity, with the effect of plastic.
2, the wide range of application: not only can carry on the basic sand making operation, but also can break the hard and hard material that the ordinary crusher is difficult to break, because of the counter strike breaking and the cone breaking.
3, to realize the great idea of “one machine and multiple materials”: sand machine set “material blow material”, “material blow iron” two kinds of crushing methods in one, high efficiency and high output, can also achieve a variety of material to meet the various production requirements.
4, hydraulic automatic lifting device, reduce labor intensity, replace the rotor and its accessories easily and conveniently, improve the efficiency of use.
5, the environmental protection is very strong: in the whole breakage, the material is broken to each other, not directly contact with the metal element, but the impact and friction with the material lining layer, reduce the angle pollution and prolong the wear time of the machine. In addition, the vortex flow inside the whirling chamber eliminates the dust pollution. The whole process is very environmentally friendly.